#This file is modified by lirc's maintainer scripts.
#Any 'options' line asociated with the selected hardware will be replaced.
#However 'add options' lines will be left alone, so you can use that for
#additional module parameters.
#	ej:
#		add options lirc_serial sense=0
pre-install lirc_serial /bin/setserial /dev/ttyS1 uart none
options lirc_serial io=0x2f8 irq=3

#
# this part is for the lirc_sir module.  it does not matter
#if it uses the same port as above. the lirc_serial will not
#be used.
pre-install lirc_sir /bin/setserial /dev/ttyS1 uart none
options lirc_sir io=0x2f8 irq=3